Bearing Fitting Kit is a simple, convenient, versatile tool to mount small and medium sized bearing without damging them. The kit comprises of hardened, ground, individually numbered impact rings and sleeves. Each impact ring is as per bearing size. Impact sleeve is common for a group of rings.
Use of correct impact ring and sleeve combination, eusures that mounting forces are evenly distributed to both bearing rings, thus avoiding damage and extending operating life of bearings.
The entire kit is in a portable steel box and is designed to last for several years. The cost of the kit is recovered in a few months due to increased life of bearings.
1) ECONOMY MODEL :-
Comprising of 14 impact rings, 03 impact sleeves, 01 nylon hammer. This kit covers popularly used bearings in industry from 20 mm I.D. to 50 mm I.D. This model does not cover any bearing lesser then 20 mm I.D. Approximate weight is 11 kg.
2) FULL KIT :-
Comprising of 33 impact rings, 05 impact sleeves, 01 nylon hammer. This kit covers bearings from 10 mm I.D. to 50 mm I.D. Approximate weight is 16 kg.
In case you do not require our standard models, we can offer tailor made kits for your individual department. In this case, specify bearings used in your plant.
Overall bearing fitting kit is a worthwile INVESTMENT offering considerable SAVINGS AND VALUE FOR MONEY, since it substantially increases life of bearings, reduces downtime, eliminates damage to shaft/housing and dispenses with the need to use specialised skills to mount bearings. The same kit can also be used to mount gears, sleeves, couplings, pulleys etc.
| COMBINATION OF IMPACT SLEEVES & IMPACT RINGS | |||||||||
| IMPACT SLEEVES TYPE | IMPACT RING NO. | SINGLE-ROW BALL BEARINGS SKF SER 60 62 63 64 |
SPECIAL BALL BEARINGS SKF SER 12 22 13 23 |
SINGLE-ROW ANGULAR CONTACT BALL BEARINGS SKF SER 72 B 73 B |
DOUBLE-ROW ANGULAR CONTACT BALL BEARINGS SKF SER 32 33 |
SPHERICAL ROLLER BEARINGS SKF SER 222 213 223 |
CYLINDRICAL ROLLER BEARINGS SKF SER NU-NJ-N 2 - 3 - 4 |
TAPER ROLLER BEARING SKF SER 302 322 303 |
TAPER ROLLER BEARING SKF SER 313 323 |
| A | 10-26 10-30 10-30 |
6000 6200 6300 |
129 1200 2200 1300 |
7200 B |
3200 |
||||
| 12-28 12-32 12-37 |
6001 6201 6301 |
1201 2201 1301 2301 |
7201
B 7301 B |
3201 |
|||||
| B | 15-32 15-35 15-42 |
6002 6202 6302 |
1202 2202 1302 2302 |
7202
B 7302 B |
3202 3302 |
202 302 |
30302 |
||
| 17-35 17-40 17-47 |
6003 6203 6303 |
1203 2203 1303 2303 |
7203
B 7303 B |
3203 3303 |
203 303 |
30203 30303 |
|||
| C | 20-42* 20-47 20-52 |
6004 6204 6304 |
1204 2204 1304 2304 |
7204
B 7304 B |
3204 3304 |
21304 | 204 304 |
30204 30304 |
32304 |
| 25-47* 25-52 25-62 |
6005 6205 6305 |
1205 2205 1305 2305 |
7205
B 7305 B |
3205 3305 |
22205 21305 |
205 305 |
30205 30305 |
31305 32305 |
|
| D | 30-55* 30-62 30-72 |
6006 6206 6306 |
1206 2206 1306 2306 |
7206
B 7306 B |
3206 3306 |
22206 21306 |
206 306 |
30206 30306 |
31306 32306 |
| 35-62* 35-72 25-80 |
6007 6207 6307 |
1207 2207 1307 2307 |
7207
B 7307 B |
3207 3307 |
22207 21307 |
207 307 |
30207 30307 |
31307 32307 |
|
| E | 40-68* 40-80 40-90 |
6008 6208 6308 |
1208 1308 2308 |
7208
B 7308 B |
3208 3308 |
22208 21308 22308 |
208 308 |
30208 30308 |
31308 32308 |
| 45-75* 45-85 45-100 |
6009 6209 6309 |
1209 2209 1309 2309 |
7209
B 7309 B |
3209 3309 |
22209 21309 22309 |
209 309 |
30209 32209 30309 |
31309 32309 |
|
| 50-80* 50-90 50-110 |
6010 6210 6310 |
1210 2210 1310 2310 |
7210
B 7310 B |
3210 3310 |
22210 21310 22310 |
210 310 |
30210 32210 30310 |
31310 32310 |
|
THE IDENTIFICATION OF EACH IMPACT RING (e.g. 25-62) IS MARKED ON THE RING. THE FIRST TWO DIGITS REFERS TO SHAFT DIA, THE LATTER FIGURE TO BEARING OUTER DIA.
THE INTERNAL DIA OF THE RING IS 0.5MM GREATER THAN SHAFT DIA, WHILE THE OUTER DIA OF THE RING IS 1.3 MM LESSER THAN BEARING OUTER DIA.
© 2023 All Rights Reserved By Ekta Enterprises
